Descrizione

Sparkoz TN10 Pro Professional Floor Scrubber Robot

Product Sheet — 4-in-1 autonomous robot for professional floor cleaning, with automatic workstation and mobile water tank

Product Description

The Sparkoz TN10 Pro is a professional floor scrubber robot that combines in a single machine scrubbing, sweeping, vacuuming and dust mopping. Compact and versatile, it helps organise the daily floor cleaning of offices, shops and commercial spaces, including hotels and hospitality venues.

With a body width of 42 cm and dimensions of 52 x 42 x 49 (H) cm, it is designed to move through confined spaces and complex routes. The manufacturer states it can pass through narrow corridors of 51 cm, under conditions compatible with the robot's navigation. The manufacturer declares a maximum productivity of 756 m²/h: actual performance and cleaning times depend on furniture layout, floor condition, the mode used and operational stops.

The dry debris and dirty water separation system follows a sequence of sweeping debris, scrubbing the floor and vacuuming the recovered water, to limit the formation of sludge. The robot has a 1 L solid debris bin and two 10 L tanks, for detergent solution and recovered water. The dual roller brush provides a working width of 35 cm. The flush edge cleaning, with a declared distance of 0 cm, is designed for cleaning along edges the robot can reach. This figure does not guarantee complete cleaning of every corner or around every obstacle.

The automatic workstation and mobile water tank included support charging, water refilling and draining, and automatic roller rinsing, making it possible to schedule multiple cleaning cycles throughout the day. Periodic maintenance, refilling clean water and emptying recovered water are still required. A manual mode is also available using the included telescopic handle.

The AI navigation recognises different types of dirt, such as footprints and stubborn stains, and adapts the cleaning mode. The system can change the task sequence in high-traffic areas and send alerts when anomalies are detected. Recognition performance depends on environmental conditions.

Distributed by Tempo Style S.r.l. (Trani, BT, Italy).

Robot Technical Specifications

ModelSparkoz TN10 Pro
FunctionsScrubbing, sweeping, vacuuming and dust mopping
Declared maximum productivity756 m²/h
Scrubbing width35 cm
Squeegee width40 cm
BrushesDual roller, 0–700 rpm; 2 side brushes
Declared edge distance0 cm
Ground pressure39.6 g/cm²
Clean water tank10 L
Dirty water tank10 L
Dry debris bin1 L
BatteryLithium-ion, 25.6 V – 20 Ah
Runtime3–8 hours as declared by the manufacturer; runtime varies according to operating conditions
Charging timeLess than 2 hours
Navigation and sensorsSolid-state and 2D LiDAR, 3D TOF sensor, camera, IMU, odometer, electronic bumper, liquid level sensor, speaker
Maximum speed0.6 m/s
Maximum gradient10% while travelling, 6% while cleaning
Noise levelBelow 65 dB(A)
Compatible floorsMarble, granite, concrete, wooden floors, tiles, epoxy resin, PVC and short-pile carpet. Modes and brushes should be selected according to the manufacturer's instructions; compatibility does not mean that all surfaces can be wet-cleaned
Operating temperature0–40 °C
Manual modeStandard, with telescopic handle
Cloud platformStandard
Dimensions52 x 42 x 49 (H) cm
Weight26 kg (without water)
DistributorTempo Style S.r.l., Contrada Curatoio 5, 76125 Trani (BT), Italy

Charging Base, Workstation and Mobile Tank

Charging base35.7 x 19 x 37.5 (H) cm · AC input 85–264 V · DC output 29.2 V
Automatic workstation55 x 25 x 44 (H) cm · charging, water refilling, draining and automatic roller rinsing · 4 L waste water tank · drainage up to 4 L/min · AC input 85–264 V · DC output 29.2 V · Bluetooth · IPX4
Mobile tank50 x 30 x 80 (H) cm · clean water 50 L · dirty water 40 L · drainage up to 4 L/min · DC 24 V power supply · IPX4 · on wheels
Operating conditions0–40 °C for base and workstation; 0–45 °C for the mobile tank. Relative humidity up to 90% at 40 °C

Functions and Features

  • 4 in 1: scrubbing, sweeping, vacuuming and dust mopping in a single machine

  • Compact format: 42 cm body width and passage through 51 cm corridors as declared by the manufacturer

  • Dry/wet separation: debris collection, scrubbing and recovered water vacuuming in sequence, with dedicated containers

  • Edge cleaning: 0 cm edge distance as declared by the manufacturer

  • Automated cycles: the system automates cleaning, charging and water management cycles and supports roller rinsing. Periodic maintenance and tank handling by the operator are still required

  • Autonomous navigation: area mapping, planned routes and customised cleaning schedules

  • Dirt recognition: the AI system identifies different types of stains and automatically adapts the cleaning mode

  • Low noise: declared value below 65 dB(A)

  • Three roller brushes: sweeping, scrubbing and microfibre, to be chosen according to the floor and type of cleaning

  • HEPA filtration: captures fine dust during vacuuming

  • Tool-free maintenance: rollers, side brushes and debris bin feature quick-release mechanisms

  • Manual mode: telescopic handle for occasional deep cleaning

  • Cloud platform: management and monitoring of cleaning tasks

What's in the Box

TN10 Pro robot, charging base, automatic workstation, mobile tank with 50 L clean water and 40 L dirty water capacity, telescopic handle, 1 L dry debris bin, sweeping roller brush, scrubbing roller brush, microfibre roller brush, 2 side brushes, HEPA filter, dust bag, filter assembly, water inlet hose.

Frequently Asked Questions (FAQ)

Where can it be used?
Offices, shops and commercial spaces, including hotels and hospitality venues. The manufacturer states compatibility with marble, granite, concrete, wooden floors, tiles, epoxy resin, PVC and short-pile carpet. The mode and brush must suit the surface: for wood and carpet in particular, check the instructions before using water or detergents.
How much area does it clean?
The manufacturer declares a maximum productivity of 756 m²/h. Actual performance varies depending on furnishings, soil level, the mode used and stops for charging or water management; it does not correspond to a guaranteed time for any specific area.
How long does the battery last?
The brochure states a runtime of 3–8 hours, without assigning these values to individual cleaning modes. Actual runtime varies according to operating conditions. The declared charging time is less than 2 hours.
Which tasks does it handle autonomously?
The robot navigates and cleans autonomously according to the set schedules. The workstation and mobile tank support charging, water refilling and draining, and automatic roller rinsing. The operator must still carry out periodic maintenance and handle filling and emptying of the mobile tanks.
What is the mobile tank for?
The mobile tank supplies 50 L of clean water and collects up to 40 L of recovered water. Installation and connections of the system must follow the manufacturer's instructions.
How is the robot set up for first use?
Setup involves mapping the environment, configuring areas and cleaning schedules, and correctly positioning the workstation, following the manufacturer's instructions.
Can it also be used manually?
Yes, the included telescopic handle lets you switch to manual mode at any time.