Descrizione

Sparkoz TN70 Pro Professional Floor Scrubber Robot with Disc Brush

Product Sheet — 4-in-1 autonomous robot for floors in commercial and industrial environments, with 70 L clean water tank

Product Description

The Sparkoz TN70 Pro with disc brush is a professional floor scrubber robot designed to automate the cleaning of medium-to-large surfaces in commercial and industrial environments. It combines scrubbing, sweeping, vacuuming and dust mopping, with modes to be selected according to the surface and type of dirt. It is suitable for shopping centres, supermarkets, schools, hospitality venues, airports, stations and other environments with compatible floors.

The cleaning system uses a 51 cm disc brush, with a declared rotation speed of 200 rpm and an applied load of 27 kg. It is designed to remove stuck-on dirt from flat floors such as polished concrete, epoxy resin and VCT vinyl floors. Compatible cleaning pads can be used to adapt the treatment to the surface, following the manufacturer's instructions.

The built-in tanks of 70 L for clean water and 50 L for recovered water support extended work sessions. The 81 cm squeegee assembly collects the water after scrubbing. The declared maximum productivity is 2,040 m²/h: actual performance depends on furnishings, obstacles, soil level, programmed schedules and operational stops.

The NeverLost 360° navigation system combines vision, LiDAR and sensors to map environments, plan routes and detect obstacles. AI functions support adapting cleaning modes to detected conditions and reporting anomalies. The cloud platform lets you monitor activities and view operational reports, while the touch display makes schedule management easier.

The robot features standard manual driving and a body width of 58 cm, with overall dimensions of 116 x 58 x 121 (H) cm. The rotomoulded body, accessible tanks and quick-release cleaning assemblies make periodic maintenance easier.

The system can be configured with a manual charger, automatic charging base or workstation. The workstation supports charging, water refilling and draining. Automation reduces repetitive operator tasks; the operator remains responsible for maintenance, consumables management and the checks needed for correct operation.

Distributed by Tempo Style S.r.l. (Trani, BT, Italy).

Robot Technical Specifications

ModelSparkoz TN70 Pro — disc brush version
FunctionsScrubbing, sweeping, vacuuming and dust mopping
Declared maximum productivity2,040 m²/h
Cleaning system20-inch disc brush
Scrubbing width51 cm
Brush speed200 rpm as declared by the manufacturer
Brush pressure27 kg
Ground pressure13.2 g/cm²
Squeegee assembly width81 cm
Distance of cleaning element from sideLess than 25 cm, as stated in the brochure; this does not mean flush edge cleaning
Clean water tank70 L
Recovery water tank50 L
BatteryLithium-ion, 25.6 V; 100 Ah or 120 Ah capacity, depending on configuration
Declared maximum runtime3.6 hours scrubbing; 12 hours dust mopping. Values vary according to configuration and operating conditions
Declared charging time4 hours; varies according to battery and charging system
Maximum speed1.2 m/s
Maximum gradient6%
Declared noise level75–80 dB(A)
Navigation and sensorsNeverLost 360° system; 2D LiDAR, 3D depth cameras, ultrasonic sensors, IMU, electronic anti-collision strip and liquid level sensor. Optional 3D LiDAR
Manual drivingStandard
Cloud platformStandard
Suitable floorsPolished concrete, epoxy resin and VCT vinyl floors. Brushes, pads and detergents must be compatible with the surface
Operating temperature0–40 °C
Dimensions116 x 58 x 121 (H) cm
Weight without water199 kg
DistributorTempo Style S.r.l., Contrada Curatoio 5, 76125 Trani (BT), Italy

Charging Systems and Workstation

The TN70 Pro offers several charging and water management configurations. The systems described below are available depending on the chosen setup.

Manual chargerBattery charging via manual connection
Automatic charging baseLets the robot return to the base for charging · dimensions 45 x 35 x 55 (H) cm · weight 18.5 kg · input 100–240 V · output 29.2 V / 30 A
Automatic workstationSupports charging, water refilling and draining · dimensions 60 x 49 x 66 (H) cm · weight 38 kg · rated power 900 W · input 100–240 V · output 29.2 V / 30 A
Workstation operating conditions0–45 °C; relative humidity 20–75%
InstallationThe workstation requires power and water connections compatible with the manufacturer's instructions

Functions and Features

  • 4-in-1 cleaning: scrubbing, sweeping, vacuuming and dust mopping on a single platform
  • 51 cm disc brush: system dedicated to cleaning flat floors, with compatible pads to be chosen according to the surface
  • High-capacity tanks: 70 L for clean water and 50 L for recovered water
  • NeverLost 360° navigation: mapping, route planning and obstacle detection through sensor data fusion
  • Cleaning schedules: tasks organised by area and time, including during off-peak hours
  • AI functions: cleaning adapted to detected conditions and anomaly reporting
  • Cloud management and reports: monitoring of activities, operational data and robot status
  • OTA updates: remote software updates for system functions
  • Manual driving: direct control for tasks that require operator intervention
  • Easy maintenance: accessible tanks and quick-release cleaning components
  • Modular configuration: charging systems, workstation and optional modules can be added according to site requirements

Included Components and Configurations

This sheet refers to the Sparkoz TN70 Pro robot, disc brush version, with built-in 70 L and 50 L tanks, squeegee assembly, touch interface, manual driving and cloud platform.

Manual charger, charging base and workstation are available as alternative or additional charging systems depending on the setup. The misting module, video surveillance systems and 3D LiDAR are optional. The equipment purchased is that specified in the selected configuration and in the commercial offer.

The roller version is a separate model with different cleaning characteristics. The data in this sheet refer exclusively to the disc version.

Frequently Asked Questions (FAQ)

Which environments is it suitable for?
Commercial and industrial environments with medium-to-large surfaces and compatible floors, such as shopping centres, supermarkets, schools, hospitality venues, airports and stations. Before use, routes, accessibility and floor characteristics should be checked.
Which floors can it be used on?
For the disc version, the manufacturer lists polished concrete, epoxy resin and VCT vinyl floors. Brush, pad and detergent must be chosen according to the surface and the manufacturer's instructions.
How much area does it clean?
The declared maximum productivity is 2,040 m²/h. Actual performance varies depending on obstacles, furnishings, soil level, the schedule used and operational stops; it is not a guaranteed time for any specific area.
How long does the battery last?
The brochure for the TN70 Pro disc version states a maximum runtime of 3.6 hours scrubbing and 12 hours dust mopping. Actual runtime depends on the installed battery and operating conditions. The declared charging time is 4 hours.
Does it clean right up to the wall?
The brochure states a distance of less than 25 cm between the cleaning element and the side. This figure does not indicate flush wall cleaning and does not guarantee complete cleaning of corners or around every obstacle.
Which tasks can it automate?
The robot performs cleaning tasks according to the set schedules. With the automatic base it can handle charging; with the workstation it can also handle water refilling and draining. Periodic maintenance, consumables management and operator checks are still required.
Are the charging base and workstation the same thing?
No. The automatic base handles battery charging, while the workstation also supports water refilling and draining. Availability depends on the configuration purchased.
Can it be used manually?
Yes. Manual driving is standard and allows the operator to control the robot directly.
What is the difference between the disc version and the roller version?
The disc version is suited to flat floors and uses a 51 cm brush. The roller version uses two counter-rotating rollers, has a 52 cm working width and a 2 L solid debris bin; the manufacturer recommends it for textured surfaces and floors with grout lines. These roller-version features are not part of the disc version described in this sheet.
Is the misting module included?
The manufacturer lists it as optional. Its inclusion must be stated in the configuration and commercial offer purchased.